Rear Baer Brake Systems for 1963-1982 Corvette

$2,045.00$3,395.00

Clear

California Prop 65 Warning 

Description

Rear Baer Brake Systems for 1963-1982 Corvette.  Works with factory parking brake assembly. 1963 & 1964 Corvettes equipped with factory rear drum brakes will require a 1965-1982 disc brake caliper brackets (Part # 11529559) & 1965-1982 parking brake assembly (if desired).

Pro+ Brake System Features

  • 2-piece forged caliper design with six cross bolts for added strength
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Available with 13” and 14” rotors.
  • Machined logo that is hand painted
  • Red, Black or Silver Powder Coat Finish
  • Uses the same pad as the C5 (1997 – 2004) and C6 (2005 – 2012) Corvette for easy, cost effective pad replacement
  • Uses the C5 and C5 backing plate (1997-2012 Corvette) or the FMSI #D731
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High-grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled. 

Extreme + Brake System Features:

  • 1-piece Forged MonoBlock caliper, machined out of a single piece of 2618 forged aluminum.
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Machined logo that is hand painted
  • Red, Black or Silver Powder Coat Finish
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • Uses the common D1247 (DR11) race pad backing plate that is shared by many other competition calipers
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.

100% MADE IN USA with U.S.-sourced material

Wheel Size Fitment

13″ Rotor – 17″ Wheels

14″ Rotor – 18″ Wheels

(Use template to verify fitment)

Instructions

C2-C3_Rear_Ext___Pro.pdf

Installation Instructions

Temp_C2-C3_Rear_Pro__13.pdf

Template Pro 13

Temp_C2-C3_Rear_Pro__14.pdf

Template Pro 14

Temp_C2-C3_Rear_Ext__14.pdf

Template Extreme 14

Additional information
Caliper Design

,

Caliper Color

, ,

Rotor Diameter

,

Suspension location

Suspension type

Year

, , , , , , , , , , , , , , , , , , ,

Make

Model

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Rear Baer Brake Systems for 1963-1982 Corvette”

Vehicle Fitment
Make Model Year
CHEVROLET CORVETTE 1963 - 1982

Rear Baer Brake Systems for 1963-1982 Corvette

$2,045.00$3,395.00

Clear

California Prop 65 Warning 

Description

Rear Baer Brake Systems for 1963-1982 Corvette.  Works with factory parking brake assembly. 1963 & 1964 Corvettes equipped with factory rear drum brakes will require a 1965-1982 disc brake caliper brackets (Part # 11529559) & 1965-1982 parking brake assembly (if desired).

Pro+ Brake System Features

  • 2-piece forged caliper design with six cross bolts for added strength
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Available with 13” and 14” rotors.
  • Machined logo that is hand painted
  • Red, Black or Silver Powder Coat Finish
  • Uses the same pad as the C5 (1997 – 2004) and C6 (2005 – 2012) Corvette for easy, cost effective pad replacement
  • Uses the C5 and C5 backing plate (1997-2012 Corvette) or the FMSI #D731
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High-grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled. 

Extreme + Brake System Features:

  • 1-piece Forged MonoBlock caliper, machined out of a single piece of 2618 forged aluminum.
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Machined logo that is hand painted
  • Red, Black or Silver Powder Coat Finish
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • Uses the common D1247 (DR11) race pad backing plate that is shared by many other competition calipers
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.

100% MADE IN USA with U.S.-sourced material

Wheel Size Fitment

13″ Rotor – 17″ Wheels

14″ Rotor – 18″ Wheels

(Use template to verify fitment)

Instructions

C2-C3_Rear_Ext___Pro.pdf

Installation Instructions

Temp_C2-C3_Rear_Pro__13.pdf

Template Pro 13

Temp_C2-C3_Rear_Pro__14.pdf

Template Pro 14

Temp_C2-C3_Rear_Ext__14.pdf

Template Extreme 14

Additional information
Caliper Design

,

Caliper Color

, ,

Rotor Diameter

,

Suspension location

Suspension type

Year

, , , , , , , , , , , , , , , , , , ,

Make

Model

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Rear Baer Brake Systems for 1963-1982 Corvette”

Vehicle Fitment

Rear Baer Brake Systems for 1963-1982 Corvette

$2,045.00$3,395.00

Clear

California Prop 65 Warning 

Description

Rear Baer Brake Systems for 1963-1982 Corvette.  Works with factory parking brake assembly. 1963 & 1964 Corvettes equipped with factory rear drum brakes will require a 1965-1982 disc brake caliper brackets (Part # 11529559) & 1965-1982 parking brake assembly (if desired).

Pro+ Brake System Features

  • 2-piece forged caliper design with six cross bolts for added strength
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Available with 13” and 14” rotors.
  • Machined logo that is hand painted
  • Red, Black or Silver Powder Coat Finish
  • Uses the same pad as the C5 (1997 – 2004) and C6 (2005 – 2012) Corvette for easy, cost effective pad replacement
  • Uses the C5 and C5 backing plate (1997-2012 Corvette) or the FMSI #D731
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High-grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled. 

Extreme + Brake System Features:

  • 1-piece Forged MonoBlock caliper, machined out of a single piece of 2618 forged aluminum.
  • Stainless steel pistons, abutments and noise suppression springs
  • Staggered piston sizes to minimize pad wear
  • Dual seals (dust/weather and pressure) to meet D.O.T specifications
  • Machined logo that is hand painted
  • Red, Black or Silver Powder Coat Finish
  • Uses correct banjo style fittings, Baer does not use any pipe thread
  • Uses the common D1247 (DR11) race pad backing plate that is shared by many other competition calipers
  • 6061 T-6 billet aluminum hat (anodized black) and bolted to the rotor
  • High grade U281 fine thread stainless hardware (with captured nuts). Rotor comes pre-assembled.

100% MADE IN USA with U.S.-sourced material

Wheel Size Fitment

13″ Rotor – 17″ Wheels

14″ Rotor – 18″ Wheels

(Use template to verify fitment)

Instructions

C2-C3_Rear_Ext___Pro.pdf

Installation Instructions

Temp_C2-C3_Rear_Pro__13.pdf

Template Pro 13

Temp_C2-C3_Rear_Pro__14.pdf

Template Pro 14

Temp_C2-C3_Rear_Ext__14.pdf

Template Extreme 14

Additional information
Caliper Design

,

Caliper Color

, ,

Rotor Diameter

,

Suspension location

Suspension type

Year

, , , , , , , , , , , , , , , , , , ,

Make

Model

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Rear Baer Brake Systems for 1963-1982 Corvette”

Vehicle Fitment