(812) 481-4787
Request call

Shock Components

Sort Alphabetically: A to Z
128 Per Page
1.7" Tall Eye Mount for Shockwave/CoilOver
$50.00
* Sold Individually All eyelets include bearing and spacers kit.   Fits all HQ and TQ Series  CoilOvers and Shockwaves  (2" diameter threaded body)...
In stock
+ −
Add to wish list Add to comparison list
1/2" Shock Stud
$10.00
Sold individually.
In stock
+ −
Add to wish list Add to comparison list
1/2" x 1" Aluminum Bearing Spacer
$2.50
Aluminum Bearing Spacer for CoilOvers/Shockwaves.   For use with 1/2" bolt and creates a 1" overall width.    Sold individually (two needed per bearing).  
In stock
+ −
Add to wish list Add to comparison list
1/2" x 1.25" Aluminum Bearing Spacer
$2.50
Aluminum Bearing Spacer for CoilOvers/Shockwaves.   For use with 1/2" bolt and creates a 1.25" overall width.    Sold individually (two needed per bearing)....
In stock
+ −
Add to wish list Add to comparison list
1/2" x 2" Aluminum Bearing Spacer
$2.50
Aluminum Bearing Spacer for CoilOvers/Shockwaves.   For use with 1/2" bolt and creates a 2" overall width, commonly used on RideTech StrongArms   Sold...
In stock
+ −
Add to wish list Add to comparison list
2" Tall Stud Mount for Shockwaves/CoilOver
$75.00
* Sold Individually All stud tops include delrin ball mount and hardware.  Fits all HQ and TQ Series CoilOvers and Shockwaves (2" diameter threaded body)...
In stock
+ −
Add to wish list Add to comparison list
2.7" Tall Eye Mount for Shockwave/CoilOver
$50.00
* Sold Individually All eyelets include bearing and spacer kit.   Fits all HQ and TQ Series  CoilOvers and Shockwaves  (2" diameter threaded body)...
In stock
+ −
Add to wish list Add to comparison list
2.75" Tall Stud Mount for Shockwaves/Coilover
$75.00
* Sold Individually All stud tops include delrin ball mount and hardware.   Fits all HQ and TQ Series  CoilOvers and Shockwaves  (2" diameter threaded...
In stock
+ −
Add to wish list Add to comparison list
3.7" Tall Eye Mount for Shockwave/CoilOver
$50.00
* Sold Individually All eyelets include bearing and spacer kit.    Fits all HQ and TQ Series  CoilOvers and Shockwaves  (2" diameter threaded body)...
In stock
+ −
Add to wish list Add to comparison list
3.75" Tall Stud Mount for Shockwave/Coilover
$75.00
* Sold Individually All stud tops include delrin ball mount and hardware.   Fits all HQ and TQ Series  CoilOvers and Shockwaves  (2" diameter threaded...
In stock
+ −
Add to wish list Add to comparison list
5/8" Shock Stud
$10.00
In stock
+ −
Add to wish list Add to comparison list
5/8" Shock Stud (Cantilever Pin) "Large Button Head"
$10.00
In stock
+ −
Add to wish list Add to comparison list
5/8" x 1.25" Aluminum Bearing Spacer
$2.50
Aluminum Bearing Spacer for CoilOvers/Shockwaves.   For use with 5/8" bolt and creates a 1.25" overall width.    Sold individually (two needed per bearing)....
In stock
+ −
Add to wish list Add to comparison list
5/8" x 1.4375" Aluminum Bearing Spacer
$2.50
Aluminum Bearing Spacer for CoilOvers/Shockwaves.   For use with 5/8" bolt/stud and creates a 1.4375"" overall width, commonly used shock studs and...
In stock
+ −
Add to wish list Add to comparison list
Aluminum Clamp for 5/8" Shock Shaft
$35.00
Aluminum Clamp for 5/8" Shock Shaft.   Used to hold 5/8" shock shaft when changing Shockwave or CoilOver mounts.
In stock
+ −
Add to wish list Add to comparison list
Bearing Spacer Pack
$10.00
Bearing Spacer Kit.  Includes two spacers for 5/8" bolt and two for 1/2" bolt.  (1.25" Over all width)
In stock
+ −
Add to wish list Add to comparison list
Bearings 1" x 0.625"x .5"
$10.00
This Teflon lined bearing is used in all current Ridetech CoilOvers and Shockwaves.   1" O.D. x .625" I.D. x .5" wide.
In stock
+ −
Add to wish list Add to comparison list
Cantilever Pin / Button Head Spacer
$5.00
Works with 90001619 or 90002329
In stock
+ −
Add to wish list Add to comparison list
Coilover Spring Mounting Kit
$30.00
This coilover spring mounting kit features a split adjusting collar with a hex head pinch bolt as well as a standard height "flat" spring cap. Works with 2.5" I.D. coil springs. 
In stock
+ −
Add to wish list Add to comparison list
Delrin Spring Washer (Single Ring)
$5.00
Delrin Spring Washers now come standard on any new coilover purchase.   They are placed between the spring and coil retainer.   They significantly reduce...
In stock
+ −
Add to wish list Add to comparison list
Dropped Spring Retainer Cup
$25.00
The dropped spring retainer cup will lower the spring position 3/4" lower from the top coilover mount. In certain applications this will help clearance...
In stock
+ −
Add to wish list Add to comparison list
Pinch Bolt for RideTech CoilOvers
$0.75
This M5 X 0.8 X 18mm Stainless Socket Head Cap Screw is used as a "pinch bolt" on all RideTech CoilOver adjusting nuts.
In stock
+ −
Add to wish list Add to comparison list
Rebound Knob for RideTech Shocks
$1.50
This glass filled nylon rebound knob is used on all current Ridetech CoilOvers and Shockwaves & Shocks.
In stock
+ −
Add to wish list Add to comparison list
Retaining Ring for RideTech CoilOver
$3.00
This retaing ring is using on all RideTech CoilOvers to attach the upper spring mount to the upper shock mount.   (.078" CS X 1.345" ID) 302SST
In stock
+ −
Add to wish list Add to comparison list
Shock Stud Cantilever Pin "Small Button Head"
$10.00
In stock
+ −
Add to wish list Add to comparison list
Snap Rings - Pack
$5.00
In stock
+ −
Add to wish list Add to comparison list
Torx Screw for RideTech Shock Rebound Knob
$0.75
This stainless screw is used on all current RideTech CoilOvers, Shockwaves and Shocks to fasten the rebound knob to the shock mount.   #4-40 X 1/4 TLG,...
In stock
+ −
Add to wish list Add to comparison list
Trunnion Mount 2.25-2.875"
$20.00
A Trunnion Mount, also known as a T-Bar, is used to mount a lower shock bearing mount to an already existing oem control arm saving you time fabricating...
In stock
+ −
Add to wish list Add to comparison list