1964-70 Mustang/Cougar power steering conversion.
Borgeson offers a modern integral power steering conversion for your 1964-1970 classic Mustang. The conversion box is a remanufactured GM Delphi 600 Integral power steering gearbox. The Delphi 600 represents the latest generation of integral power steering gearbox technology with true modern power steering feel, feedback and a sporty 14:1 ratio. Borgeson has remanufactured this box to bolt directly to the factory mounting location and to fit the stock pitman arm. The factory column will need to be collapsed or shortened approximately 2.5” for clearance of conversion box.
Steering column modifications
1965-67– You will need to trim the outer column tube for clearance of the rag joints and use replacement inner column shaft; Conversion box will then connect to stock column with rag joint.
1968-1970- factory collapsible steering column, gently tap on the spline column shaft with a rubber mallet to collapse the shaft in on itself for the needed clearance. Conversion box will then connect to column with half rag joint.
Factory Z-bar clutch linkage will not fit, must use Part # 12099533.