Instinct Tuning Software and Installation Instructions
Downloading Your Instinct Tuning Software
You’re almost ready to start installing and tuning your active chassis. Below you will find various downloads including software and driver files as well as hardware and software instruction pdf files. Your Instinct system will arrive with a calibration pre-installed. Note: Before making any changes in the software, please make sure to save original tuning files.
Download and install the USB driver, DSC software and instructions:
- USB Driver: Proceed to the following link and install the driver. Click to download the USB driver HERE
- Instinct Software: Next, download the Instinct Tuning Software below and unzip the file.
You are now able to begin tuning your Instinct suspension. Remember to save the original tuning files before making any changes in the software. We advise working with the shock calibration table first to familiarize yourself with the software and its capabilities. Please contact us if you have questions on how to navigate the software.
NOTE: The software download included on this page is for Windows only. If you are planning to tune your suspension via Mac, please contact Jordan at email@example.com, and he will work with you on Mac-compatibility. This will require third party software or a hard drive partition until we release a dedicated Mac version of the software.
As a friendly reminder, our tech support hours are Mon-Fri 8am-5pm.